Skip to main content
Ribbon Cutting Desk Search

Ribbon Cutting Run of Show: A Timed Program Template

A ribbon cutting run of show is a timed list of every step, who does it and the cue that starts it. A short ceremony fits in about 15 minutes and one with several speakers in about 30; both timings below are editorial examples, not rules. Print it, give a copy to every person with a role, and brief them before guests arrive.

Organizer with a clipboard beside a small wooden podium with a red and white ribbon, guests waiting on the pavement

Section of: How to Plan a Ribbon Cutting Ceremony: Checklist

A run of show is the page everyone holds on the day. It lists each step in order, the time it should start, who does it and what cue launches it. If you need the overall checklist first, read how to plan a ribbon cutting ceremony; this page is about timing and cues. For the words themselves, see the script page.

What is a run of show?

A run of show is a one-page, timed sequence of the ceremony, with one line per step. Each line has a start time, a duration, a name, an action and a cue. It differs from a script (which holds the words) and from a checklist (which holds tasks before the day).

Keep it to one page. If it needs two, the ceremony is probably too long.

What does a 15-minute program look like?

This is an editorial example for a small ceremony with one or two speakers. Times are minutes from the planned start, and the program should begin when you said it would.

Minute Step Who Cue
0 Welcome and purpose Host Host steps to the microphone
2 Thanks and introductions Host “Please join me in thanking…”
4 Remarks 1 Owner or project lead Host: “Please welcome…”
7 Remarks 2 Guest of honor Host introduces
10 Line-up Host and wrangler Host invites cutting party forward
11 Countdown and the cut Host and cutting party “On three…”
12 Applause and pause for photos Everyone Host holds still for a few seconds
13 Group photo Photographer Host: “One more for the group”
14 Thanks and invitation in Host “Please join us inside”

Add arrival time before minute zero, and time after minute fourteen for conversation.

What does a 30-minute program with several speakers look like?

This longer editorial example suits public buildings and events with officials. The extra time goes to speakers, not to the cut.

Minute Step Who
0 Welcome and housekeeping (parking, restrooms, accessibility notes) Host
3 Acknowledgements of officials and partners Host
6 Remarks from the owner or project lead Speaker 1
11 Remarks from the main partner or funder Speaker 2
16 Remarks from an official Speaker 3
21 Thank-you to the team and builders Host
23 Cutting party lines up Wrangler
25 Countdown and the cut Host
26 Applause, photos, group shot Photographer
29 Invitation in and what happens next Host

Notice that the three speakers get five minutes each, with the official last. Whatever order you choose, put the strongest or most senior speaker immediately before the cut so the moment builds.

What cues does the host need?

Cues are simple phrases agreed in advance so nobody guesses. Write them on the run of show and say them aloud in the briefing.

  • Start cue: the host steps to the microphone and the helper dims or quiets any music.
  • Speaker cue: the host says the speaker’s name and role, then steps aside.
  • Line-up cue: “Would the cutting party please join me at the ribbon.” The wrangler guides them.
  • The cut cue: a countdown of three, two, one, or a simple “on three.” Decide in advance whether the host counts aloud and whether the group cuts on the word or after it.
  • Hold cue: after the cut, the host pauses so photographers get the moment; then “Thank you all” releases the group.

Say who is giving the cue and who is receiving it. A common problem is two people each waiting for the other.

What about buffer, delays and a rain plan?

Build slack into the plan and name who decides. Start on time, because late starts compound; but plan a buffer after the program, not before it.

  • Late guests of honor. Decide in advance how long you will wait. One approach is to start on time and have the host acknowledge the late guest on arrival.
  • Overrunning speakers. Tell them the limit. Agree a discreet signal from the helper at the back.
  • Sound failure. Have a backup, even if it is the speaker’s loud voice and a closer audience.
  • Rain plan. Name a fallback location and a decision time. The National Weather Service says that if you hear thunder you are likely within striking distance of the storm, so the weather lead should not wait for the program to end. Write the fallback order down: who announces, where guests go and how the cut will work indoors.

How do you print and share the running order?

Print one copy per role, in large type, and keep another version as a guest-facing program. Give copies to the host, speakers, wrangler, photographer, greeter and weather lead; tell them the ceremony will follow the order on the page.

For accessibility, the ADA says covered entities must communicate effectively with people who have communication disabilities, and it lists real-time captioning as an option for people who are deaf or hard of hearing but do not use sign language. Offer the guest program in advance and in large print on request, and give guests a contact for accommodations.

The ceremony program builder will generate a timed run of show from your speakers and times. For photo timing, see ribbon cutting photos. When the page is final, the ceremony overview shows how it fits the whole event.

People also ask

How long should a ribbon cutting last?

Aim for about 15 minutes of program for a small ceremony and about 30 for one with several speakers; these are editorial planning examples, not standards. Allow extra time before the start for arrivals and after the cut for photos and conversation. If you are unsure, cut a speaker rather than extend the program.

Who runs the program?

The host or a named master of ceremonies runs it, using the printed run of show as a script. A separate person, often a helper or event lead, watches the clock, manages the cutting party and handles surprises. Having one person own the timing and another own the stage keeps the host free to speak.

Where do photos fit?

Photos fit in two places: the cut itself, which the photographer captures live, and a posed group shot immediately after, while everyone is still lined up. Put a short, explicit slot for the group photo in the run of show, so guests do not drift away. More detail is in the photo guide.

How many speakers is too many?

More than three or four starts to strain a short ceremony. Each speaker adds introductions, transitions and risk of running long. Set a time limit for each, ask them to confirm it in advance, and have the host close politely if someone overruns. If many people deserve thanks, thank them together in the host's welcome.

Can I skip the speeches?

Yes. A host welcome, a short thank-you and the cut make a complete ceremony. Skipping speeches suits a casual opening or a small crowd. If you skip them, consider one sentence from the owner or project lead, because guests like to hear from the person the day is about. Keep any remarks to a minute or two.

Our sources

  1. Effective Communication (ADA.gov) (ada.gov)
  2. Lightning Safety (National Weather Service) (weather.gov)

Related guides