Skip to main content
Ribbon Cutting Desk Search

Chamber of Commerce Ribbon Cutting: How It Works

A chamber of commerce ribbon cutting is a ceremony a local chamber helps stage for a member business, often with chamber staff or volunteers attending. The process is set by each chamber, so there is no universal rule. The two chamber pages opened for this guide both ask for an online request and advance notice, and both describe what the chamber and the business each do.

Business owner and guests in business attire seen from behind at a modern storefront door with a red ribbon across it

Section of: Ribbon Cutting Ceremony: Meaning, Steps and Ideas

A chamber of commerce ribbon cutting is a ribbon cutting that a local chamber helps arrange and attend, usually for a business that is opening, moving or renovating. If you want the general picture first, start with the ribbon cutting ceremony guide. This page explains what the chamber side usually looks like, using two chamber pages we opened as examples. They are examples, not rules: every chamber sets its own policy.

What a chamber ribbon cutting is

The U.S. Chamber of Commerce describes a chamber as a regional organization of local businesses that support the interests of its members, with members able to attend meetings and events. A ribbon cutting is one of the events some chambers host for members. The chamber lends its staff or volunteers, its name and its contacts, and the business supplies the place and the news.

Who qualifies and how to request one (check your chamber)

Among the pages we opened:

  • One chamber’s Ribbon Cuttings page asks that the business be a new or current member in good standing. It lists qualifying situations including a recent opening, a move to a new location, a remodel or expansion, a milestone anniversary and a groundbreaking, and asks the business to pre-register with the chamber’s request form.
  • The Ribbon Cutting FAQs page of the Greater Tallahassee Chamber of Commerce says requesters must be members, that ribbon cuttings are mainly for grand openings, and that milestones, remodels and new locations also qualify. It says a business with no storefront, such as a home-based business, is fine, and that it often holds such ribbon cuttings outside its own office.

Your chamber may have different eligibility, so find its page or call. Look for the name of the page, usually “ribbon cutting”, “ribbon cutting request” or a member program page.

What the chamber usually does vs what the business does

The examples divide the work like this. These are what those two chambers say, not a universal list.

Chamber (as described by these examples) Business (as described by these examples)
Scheduling Confirms the date and flags conflicts Proposes a date and time, submits the request, waits for confirmation
People Sends ambassadors or a leadership team member to emcee Makes sure the right staff are present at the scheduled time
Promotion Notifies its board and members, lists the event, may invite local officials Runs its own promotion and invites its own guests
Items Brings the ribbon (as the pages describe) Chooses who cuts, and whether to add food, drinks or decorations
Photos Shares photos on its channels Takes its own photographs for its own use

One of the chambers also asks that the event generally stay open to the public, and says it reserves the right to create and moderate the agenda. Read those lines on your chamber’s page before you promise guests a program.

Timeline from request to ceremony (generic; chambers differ)

The pages opened show different notice periods: at least two weeks at one chamber, and three to four weeks or at least four weeks in different places on the other chamber’s page. Use this as an editorial planning pattern, not a rule.

  1. Find the chamber’s policy page and note the notice period and any days or hours it offers.
  2. Pick a target date and an alternative.
  3. Submit the request, and keep the confirmation. One chamber states that without the confirmation message the request has not been received.
  4. Confirm roles with your chamber contact: who emcees, who speaks, who brings the ribbon and who takes photos.
  5. Send invitations with the confirmed time. See ribbon cutting invitation for wording.
  6. Run the day from a written program, then follow up.

Preparing your remarks and guest list

Even when a chamber member emcees, the host usually has a few lines to prepare. Keep them short: a welcome, two or three thank-yous, and one sentence on what the place is for. Ask the chamber how long you may speak, because one page we opened leaves it to the chamber’s agenda. For guests, start with your staff, customers, neighbours and partners, then add chamber members and any local officials the chamber invites on your behalf. The plan a ribbon cutting ceremony checklist helps you turn that list into a schedule.

After the event: sharing and follow-up

Ask the chamber where it posts photos, and take your own photographs by agreeing a photo moment in advance (see ribbon cutting photos). Send a short thank-you to the chamber contact and to speakers, and note anything you would change next time. Do not assume the chamber will cover follow-up for you.

Questions to ask your chamber

  • Do you hold ribbon cuttings for non-members, or for businesses that opened a while ago?
  • What notice do you need, and which days and times are available?
  • Who emcees, and how long may the owner speak?
  • What do you provide and what should we bring?
  • How do you promote the event, and what do you expect us to do?
  • What happens if the weather is bad or the date changes?
  • Does the event need to stay open to the public?
  • Who may we invite, and may we add a larger event, such as an open house, around the ceremony?

For etiquette as a guest or host, see ribbon cutting etiquette.

Cue-checked by the Ribbon Cutting Desk team: each fact above was matched to a source this page cites. Chamber practices differ; check the policy of your own chamber.

People also ask

How do I get a chamber of commerce ribbon cutting?

Contact your local chamber and ask how it handles ribbon cuttings, because each one sets its own process. The two chamber pages opened for this guide both ask the business to submit an online request in advance, and one says to wait for a confirmation message. Ask about notice, available days and times, and what the chamber will and will not provide.

Do you have to be a member?

It depends on the chamber. One of the chamber pages opened for this guide says the requester must be a new or current member in good standing, and the other says requesters must be chamber members. Other chambers may differ, so check the page or ask the staff before you plan around a chamber date.

Who brings the ribbon?

At the two chambers whose pages we opened, the chamber brings it. One lists the ceremonial ribbon among what it provides, and the other says it brings a red ribbon and a commemorative certificate. Confirm this with your own chamber, and agree who collects and carries items home afterwards.

Who speaks at a chamber ribbon cutting?

The chamber page examples suggest a shared program. One says a chamber leadership team member gives congratulatory remarks and emcees, and that the owner or manager can say a few words before the cut. The same chamber reserves the right to set and moderate the agenda. Ask your chamber who emcees and how long your remarks can run.

Does the chamber promote the event?

Often, but not as a replacement for your own promotion. One chamber lists notices to its board and members, invitations to local officials and a calendar listing, and also expects the business to run its own campaign and not rely only on the chamber to draw attendees. The other shares photos on its website and social channels. Ask what yours does.

Can I hold a ribbon cutting without a chamber?

Yes. Nothing about a ribbon cutting requires a chamber, and any host can run one. You will plan the invitations, the program, the speakers and the photographs yourself. Our planning checklist and timed program template cover each step, and you can still invite chamber members and local officials as guests.

Our sources

  1. What Is a Chamber of Commerce and Why Join One? (U.S. Chamber of Commerce, CO-) (uschamber.com)
  2. Ribbon Cuttings (a local chamber of commerce member page) (keywestchamber.org)
  3. Ribbon Cutting FAQs - Greater Tallahassee Chamber of Commerce (talchamber.com)

Related guides