Skip to main content
Ribbon Cutting Desk Search

Grand Opening Ribbon Cutting: Where It Fits in the Day

A grand opening ribbon cutting is the short ceremony moment inside a larger opening day, usually placed near the start so guests see the doors open. There is no fixed time. Choose a slot when your invited guests can be present, when photographs will look good and before the general crowd disperses, and plan an indoor fallback in case of bad weather.

Customers gathered outside a newly opened shop, seen from behind, with a ribbon stretched across the doorway

Section of: Ribbon Cutting Ceremony: Meaning, Steps and Ideas

A grand opening ribbon cutting is the ceremony moment that sits inside a longer opening day. The full ceremony is described in our ribbon cutting ceremony guide; this page is only about where the cut belongs in the day and how to time it. The timings below are editorial examples, not standards.

Ribbon cutting inside a grand opening schedule

Treat the day as three parts: the ceremony, the open house and the wind-down. The ceremony is short and has a guest list; the rest of the day is for everyone. A simple editorial sequence:

  1. Setup window. Staff are in place and the entrance route is clear before anyone arrives.
  2. Arrival of invited guests. A host greets people and points them to the spot.
  3. Ceremony. Welcome, thanks, the cut, applause.
  4. Doors open. The public comes in right after the cut.
  5. Open house. Tours, conversations and photographs.

For a minute-by-minute template, see the ribbon cutting run of show.

Before, during and after the cut

Before. Walk the route guests will take, check the spot for space and a clear line of sight, agree the cue and decide who stands where.

During. Keep it short. A host welcomes guests, thanks the people involved, introduces anyone special and counts down. Speakers should know their turn.

After. Let people applaud and take a few photographs, then open the doors and invite guests in. Ask the host to say what happens next so the crowd flows inside rather than lingering at the entrance.

Timing the cut for foot traffic and photos

  • Pick a time when the people you most want present can attend, usually a weekday morning for local officials or an hour when your own customers are free.
  • Leave room before the cut for guests who arrive late.
  • Think about light: a spot facing away from harsh midday sun is easier to photograph. Our ribbon cutting photos page covers framing.
  • Keep the gap between the cut and opening the doors short so momentum is not lost.
  • If a chamber attends, its schedule may fix the time. One chamber page we opened says events are scheduled by availability within set business hours.

Who to invite to the cut vs the general opening

The cut can have a short invited list: staff, partners, neighbours and any officials. The general opening is for the public. One chamber FAQ says ribbon cuttings should generally remain open to the public, so you can mention both groups on the invitation. Send invited guests a time earlier than the public start. Wording help is on the ribbon cutting invitation page.

Weather and backup plans

Decide on a weather plan before invitations go out. The National Weather Service advice is to go indoors when thunder roars and stay there for 30 minutes after the last clap of thunder. It says carports, open garages, covered patios and pavilions are not adequate shelter, and that a completely closed building is preferred. In practice, that means an indoor spot for the cut, a person who decides the switch and a way to tell guests (a text, a sign or the host’s announcement).

For rain without thunder, a covered entrance and a few umbrellas keep the program on schedule. Always follow local instructions and venue rules, and keep a clear path so guests can move indoors quickly.

What this guide does not cover (opening-day marketing and promotions)

This guide stays on the ribbon cutting moment. It does not cover marketing, promotions or what to put on offer on opening day. If a chamber is involved, one page we opened says the business is expected to run its own promotion, so plan for that separately. For the ceremony’s own planning, use the plan a ribbon cutting ceremony checklist, and see what the ceremony means and ribbon cutting etiquette for the basics.

Cue-checked by the Ribbon Cutting Desk team: each fact above was matched to a source this page cites. This is general information, not safety advice. Follow your venue’s rules and local weather alerts.

People also ask

Should the ribbon cutting happen at opening time?

Usually the cut is placed at or just before the moment doors open, because it gives the opening a visible start. There is no rule, though. Choose the time when your invited guests can attend, then open to everyone straight after. If a chamber is involved, its available hours may decide the slot, so confirm with it before printing times.

How early should guests arrive?

Ask invited guests to arrive 15 to 30 minutes before the cut, as an editorial planning example rather than a standard. That gives time to park, find the spot, greet the host and gather for photographs. Put the arrival time on the invitation separately from the ceremony time so people understand when the program actually starts.

Do you cut before or after the speeches?

Most programs put short remarks first and the cut last, so the cut is the high point. Some hosts cut first and speak afterwards if the crowd is large or the weather is uncertain. Either order works. Tell speakers the order in advance, and make sure photographers know the cue.

Can a soft opening have a ribbon cutting?

Yes, a ribbon cutting can mark whichever day you decide is the official start, including a soft opening. State clearly on the invitation what the event is and who it is for. Do not call it a grand opening if you plan a second public launch later, to avoid confusing guests.

What if it rains?

Have an indoor spot for the cut and decide who calls the switch, and by when. If there is thunder, the National Weather Service advice is to go indoors and wait 30 minutes after the last thunder before returning outside. Rain alone is a comfort problem, with umbrellas and a covered entrance; thunder is a safety problem.

Our sources

  1. Lightning Rules (National Weather Service) (weather.gov)
  2. Ribbon Cuttings (a local chamber of commerce member page) (keywestchamber.org)
  3. Ribbon Cutting FAQs - Greater Tallahassee Chamber of Commerce (talchamber.com)

Related guides